Multi-functional Training Modes
The 300M remote dog collars has 3 train modes, beep (also named ‘tone’), vibration, and shock. Some training modes have different level can be adjusted.
300 Meters Control Range
With a remote control range up to 300 meters (984 feet), trainers can easily train the dog in the park or backyard.
Adjustable Strap Fits Most Dogs
These 300M remote dog collars with an adjustable strap collar (8-27 inches long), suitable for all breeds and sizes of dogs over 8 lbs & age over 6 months.
Super Safe Protection Mode
Patpet Training Collars has come with 2 sets of conductive silicone prong caps, and 2 metal prongs, which will anti hurting dogs’ skin when it is in strong training modes, Humanized set up with a keypad lock in the remote is help to prevent injuries caused by the accidental operation, very helpful to the training beginner.
Certification: The remote dog collar passed the UL/CE/RoHS/FCC certification test. So, you can trust it.
Patpet 300m remote dog collars have AAA battery and rechargeable type.
For battery type, just take off the back shell of the remote and receiver, then put on the AAA batteries.
For rechargeable, only use the charge cable for charging.
Please fit the collar properly so that the contact points press firmly against the dog’s skin. When properly fitted, you should be able to put a finger in between the receiver collar and dog’s neck.
Too loose: the receiver collar will move around the dog’s neck, too contact points may hurt the dog’s skin.
Too tight: it may cause dog’s to breathe hard.
Don’t shave the pet’s neck as this may increase the risk of skin irritation.
The collar should not be worn for more than 12 hours per day. Or it may cause skin irritation
The unit comes with ‘up and down’ buttons to control the Vibrate (or shock) level, with level 1 being the lowest level and level 8 being the highest.
The level of vibrate (or shock) best suited for your dog depends on your dog’s temperament and threshold for vibrate.
Always start at the lowest level and work your way up.
The appropriate level can be found when the dog responds to the vibrate with a mild reaction,
such as a flick of the ear, a lick of the lips, a tensing of the neck muscles, etc.
The vibrate level may vary depending on the training situation.
When highly distracted, dogs will require a higher level of vibrate.
Turn off the first (or second) collar
Press the “power”button and hold for 5 seconds until the green indicator off. And then the green and red lights will flash alternately. (lights keep flash 16 seconds only)
Press the “2/1 channel” button and choosing channel 1 (Change the channel in 16 seconds. When pair second collar, please choosing channel 2)
Press the “beep + vibration” button at the same time, the green indicator on the receiver will flash 5 times rapidly.
The Channel switch setting is complete. You can choose Dog 1 or Dog 2 to remote by pressing the 2/1 channel button.
1. Purchase a Quality Product
2. Start with the basics commands
3. Let your dog get used to the collar first
4. Show your dog the behavior you want
5. Make sure you use various training techniques, no just collar
6. Aim to use “vibrate” or no collar at all, Correct Problem Behaviors
7. Know when to ask for help, professional trainers can give you all sorts of great tips
600M Dog Training Collars